Baby-lock ProStitcher Version 14.04.0051 (BLPS2) Instruction Manual de usuario Pagina 9

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 75
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 8
Pro-Stitcher User Manual3.4 Installation Instructions
Baby Lock Crown Jewel
Figure 3.2
Tools Required
Power drill
4mm Allen wrench
5mm Allen wrench
Slotted screwdriver (one large and one small)
Phillips screwdriver (one large and one small)
Knife or Wire cutters to tool required
X-rack Installation
Note: Owners of the Majestic Frame should also
have purchased a Pro-Stitcher shim kit (item No.
BLPS-GMFKIT) for the Majestic Frame. Please fol-
low instructions included in that kit for shimming
the track prior to installing the X-rack.
1. Remove the blue exirack (Page 3.3, A) and the
Pro-Stitcher carriage (E) from the box. Cut the
cable ties from the front of the carriage
(Figure 3.2).
2. Place the Pro-Stitcher carriage on the frame with
the white X-axis gear toward the front of the ta-
ble. e white X-axis gear drives the carriage le/
right across the table.
3. Starting at one end of the table, begin mounting
the blue exirack to the table surface. Using the
X-axis engagement lever, drop the white X-axis
gear so it engages with the blue exirack. With
the blue exirack in position under the white
gear, begin peeling the pink protective layer from
the back side of the blue exirack and pressing
down on the blue exirack to stick it to the table
surface (Figure 3.3).
Figure 3.3
Installation Instructions
Vista de pagina 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 74 75

Comentarios a estos manuales

Sin comentarios