Baby-lock ProStitcher Version 14.04.0051 (BLPS3) Instruction Manual de usuario descargar pdf (Pagina 16)

3.8 | Installaon Pro-Stcher User Manual

Y-encoder circuit board replacement

IMPORTANT: This step is required only if the circuit board on the Y-encoder is blue. If the Y-encoder

has a black circuit board, skip ahead to the next step.

Replace the Y-encoder circuit board with the one in the package (see Parts List, item G) if the circuit board

is blue and does not have a 3-pin connector aached. It is held in place with one screw and ve connecng

pins.

To replace the Y-encoder

1. Unplug the stch regulator cable from the Y-encoder.

2. Remove the screw that holds the circuit board in

place with a small Phillips screwdriver.

3. Gently pull the circuit board outward toward the front of the quilng machine (the same direcon

the screw came out).

Replace this style

Y-encoder circuit board.

This style Y-encoder circuit board

does not need to be replaced.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 96 97

Sin comentarios

Baby-lock ProStitcher Version 14.04.0051 (BLPS3) Instruction Manual de usuario Pagina 16