Baby Lock embellisher EMB12 Manual de instrucciones descargar pdf (Pagina 11)

8

5. Yarn Embellishing cont.

Yarn threader

5. Rotate the handwheel to bring the needle

bar to its highest position.

6. Raise the cloth presser lifter lever.

7. Insert yarn into the yarn port using the yarn

threader. (Fig. 4)

8. Pull the yarn from the bottom of the cloth

presser. (Fig. 5)

9. Place fabric under the cloth presser.

10.

While embellishing with yarn, fabric may

be moved in all four directions. (Fig. 6)

11. Lower the cloth presser lifter lever.

ATTENTION: Since there is such a wide vari-

ety of yarns to select from use care when

using dense, fuzzy, or thick yarns. It is recom-

mended to test sew a sample using all yarns

before sewing on your project.

Turn hand-

wheel several t

imes to insure there is no

resistance with needle penetration.

Yarn rec-

ommended for use in this machine should not

exceed 4mm (5/32 inches) in diameter. Yarn

needs to be able to slide freely within the yarn

port.

NOTE: If needle bar is not rotated to the high-

est position, the yarn will not go down through

the inside of the needle bar.

At the beginning of the yarn

embellishing, slightly pull the

end of the yarn.

Fig. 4

Fig. 5

Fig. 6

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Comentarios a estos manuales

Sin comentarios